Diethylene glycol mono-methacrylate

• Catalog Number: ACM2351431
• Product Name: Diethylene glycol mono-methacrylate
• CAS: 2351-43-1
• Category: Main Products
• Description: 2-(2-Hydroxyethoxy)ethyl 2-methylprop-2-enoate is a monomeric compound that is widely used in the synthesis of polymers, solvents, and other chemicals. It is a colorless, odorless liquid that has a low toxicity and is considered to be non-irritating to the skin and eyes.
• Synonyms: 2-(2-Methacryloyloxy-aethoxy)-aethanol; DIETHYLENE GLYCOL MONOMETHACRYLATE; 2-(2-methacryloyloxy-ethoxy)-ethanol; 5-Hydroxy-3-oxapentyl methacrylate; 2-Propenoic acid,2-methyl-,2-(2-hydroxyethoxy)ethyl ester; 2-(2-Hydroxyethoxy)ethyl methacrylate; diethylene glycol methacrylate; Methacrylicacid,2-(2-hydroxyethoxy)ethyl ester (7CI,8CI); Diethylene glycol,monomethacrylate (8CI)
• IUPAC Name: 2-(2-hydroxyethoxy)ethyl2-methylprop-2-enoate
• Molecular Weight: 174.19
• Molecular Formula: C8H14O4
• Canonical SMILES: CC(=C)C(=O)OCCOCCO
• InChI: InChI=1S/C8H14O4/c1-7(2)8(10)12-6-5-11-4-3-9/h9H,1,3-6H2,2H3
• InChI Key: OLQFXOWPTQTLDP-UHFFFAOYSA-N
• Boiling Point: 270.5ºC at 760 mmHg
• Flash Point: 103.3ºC
• Density: 1.069 g/mL
• Application: 2-HEMPE has been studied extensively for its potential applications in various fields. In medicine, it has been used as a component of polymeric materials for tissue engineering and drug delivery. In agriculture, it has been used as a component of polymers for soil stabilization and erosion control. In materials science, it has been used as a component of polymers for coatings and adhesives.
• Storage: Store at 2-8 ℃
• Exact Mass: 174.089
• Hazard Codes: Xi
• HTS Code: 2916140000
• PSA: 55.76
• Refractive Index: 1.449
• Shipping: normal
• Vapor Pressure: 0.0009 mmHg at 25°C
• XLogP3: 0.1146

Custom Q&A

What is the molecular formula of diethylene glycol mono-methacrylate?

The molecular formula of diethylene glycol mono-methacrylate is C8H14O4.

What is the molecular weight of diethylene glycol mono-methacrylate?

The molecular weight of diethylene glycol mono-methacrylate is 174.19 g/mol.

What is the IUPAC name of diethylene glycol mono-methacrylate?

The IUPAC name of diethylene glycol mono-methacrylate is 2-(2-hydroxyethoxy)ethyl 2-methylprop-2-enoate.

What is the InChI of diethylene glycol mono-methacrylate?

The InChI of diethylene glycol mono-methacrylate is InChI=1S/C8H14O4/c1-7(2)8(10)12-6-5-11-4-3-9/h9H,1,3-6H2,2H3.

What is the InChIKey of diethylene glycol mono-methacrylate?

The InChIKey of diethylene glycol mono-methacrylate is OLQFXOWPTQTLDP-UHFFFAOYSA-N.

What is the canonical SMILES of diethylene glycol mono-methacrylate?

The canonical SMILES of diethylene glycol mono-methacrylate is CC(=C)C(=O)OCCOCCO.

What is the CAS number of diethylene glycol mono-methacrylate?

The CAS number of diethylene glycol mono-methacrylate is 2351-43-1.

What is the XLogP3 value of diethylene glycol mono-methacrylate?

The XLogP3 value of diethylene glycol mono-methacrylate is 0.3.

How many hydrogen bond donor count does diethylene glycol mono-methacrylate have?

Diethylene glycol mono-methacrylate has 1 hydrogen bond donor count.

How many rotatable bond count does diethylene glycol mono-methacrylate have?

Diethylene glycol mono-methacrylate has 7 rotatable bond count.

Case Study

Preparation of Thermosensitive Glucose-functionalized Glycopolymers from DEGMA via RAFT Polymerization

Fa-Wei Shen, et al. Colloids Surf B Biointerfaces. 2019, 173:504-511.

PDEGMA-b-POVNGlu was prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization using Diethylene glycol mono-methacrylate (DEGMA) as raw material.
Synthetic procedure of PDEGMA-b-POVNGlu
· First, weigh DEGMA (1.13 g, 6 × 10-3 mol), CMPCD (13.4 mg, 6 × 10-5 mol), TfOH (12.4 mg, 7.2 × 10-5 mol) and AIBN (2.1 mg, 1.2 × 10 ) -5 mol) in a 25 mL single-neck round-bottomed flask, use DMF (2 mL) to dissolve the monomer.
· The mixture was then degassed by three freeze-thaw cycles and sealed under vacuum. The polymerization proceeded under stirring at 70 °C for 1 h. The crude product was precipitated in hexane for three times and dried under reduced pressure vacuum, homopolymer PDEGMA were obtained.
· Then grafting the glucose-functionalized monomer to the PDEGMA, PDEGMA (175 mg) added to a 25 mL one-neck round-bottom flask as macro-RAFT agent, OVNGlu (239.7 mg) and AIBN (0.35 mg) added to the flask.
· The polymerization proceeded under stirring at 70 °C for 2 d. The crude product was dialyzed (MWCO = 8000) in ultra-pure water for 48 h to remove residual monomers and then dried by freeze-drying to give polymer.