Structure

Reactive blue 2

CAS
12236-82-7
Catalog Number
ACM12236827
Category
Main Products
Molecular Weight
774.16
Molecular Formula
C29H20ClN7O11S3

If you have any other questions or need other size, please get a quote.

  • Product Description
  • Case Study
  • Custom Reviews
  • Custom Q&A
  • Synthetic Use
  • Related Resources

Specification

Synonyms
BASILEN BLUE E-3G;CI NO 61211;CI 61211;CIBACRON BLUE F3GA;CIBACRON BLUE 3G-A;1-AMINO-4-[[4-[[4-CHLORO-6-[[3 (OR 4)-SULFOPHENYL]AMINO]-1,3,5-TRIAZIN-2-YL]AMINO]-3-SULFOPHENYL]AMINO]-9,10-DIHYDRO-9,10-DIOXO-2-ANTHRACENESULFONIC ACID;REACTIVE BLUE 2;PROCION BLUE HB
IUPAC Name
1-amino-4-[4-[[4-chloro-6-(3-sulfoanilino)-1,3,5-triazin-2-yl]amino]-3-sulfoanilino]-9,10-dioxoanthracene-2-sulfonicacid
SMILES
C1=CC=C2C(=C1)C(=O)C3=C(C2=O)C(=C(C=C3NC4=CC(=C(C=C4)NC5=NC(=NC(=N5)NC6=CC(=CC=C6)S(=O)(=O)O)Cl)S(=O)(=O)O)S(=O)(=O)O)N
InChI Key
JQYMGXZJTCOARG-UHFFFAOYSA-N
Melting Point
>300ºC
Density
1.845 g/cm³
Appearance
saline suspension
EC Number
235-465-0
Exact Mass
773.00700
Hazard Statements
Xi
Safety Description
26-36
Stability
Stable. Incompatible with strong oxidizing agents.
WGK Germany
3

Preparation and Evaluation of Reactive Blue 2 Modified Chitosan Adsorbent

Vasconcelos, Helder L., et al. Reactive and Functional Polymers, 2007, 67(10), 1052-1060.

Reactive blue 2 (RB2) dye was immobilized on chitosan microspheres and the adsorption performance of the adsorbent for Cu(II) and Ni(II) ions from aqueous solutions was evaluated. The results showed that the maximum adsorption of Cu(II) and Ni(II) ions by CHS-RB2 adsorbent was 0.90 mmol g -1 and 0.19 mmol g -1, respectively.
Preparation procedure of CHS-RB2 adsorbent
· Chitosan solution was prepared by dissolving 3.00 g of chitosan powder in 100 ml of a 5% (v/v) acetic acid solution. Once fully mixed, chitosan microspheres were created by feeding the chitosan solution through a peristaltic pump. The solution was pushed through a 2.0 mm inner diameter nozzle using compressed air, dropped into a bath containing a 2.0 mol/L NaOH solution, and then gelled microspheres were washed in distilled water until reaching a neutral pH and finally dried in an oven at 60 °C.
· To conduct the experiment, 5.0 g of chitosan microspheres were exposed to a 3.0% (w/v) RB2 solution (10 ml) and 1.0 mol/L NaCl (60 ml). After 1 h of waiting for equilibrium, 3.2 mol/L1 Na2CO3 (30 ml) were introduced into the system and maintained at 80°C for 7 h in a sealed flask with stirring. Following the reaction time, the microspheres were washed multiple times with distilled water, 2.0 mol/L NaCl, and 10% methanol.

Constitutional Isomers of the P2 Receptor Antagonist Reactive Blue 2

Glänzel, Markus, et al. European journal of medicinal chemistry, 2003, 38(3), 303-312.

Reactive blue 2 (RB 2), an anthraquinone derivative, is among the most commonly utilized P2 receptor antagonists. This work evaluated the P2Y selectivity of two structural isomers of RB 2, including the meta- and para-isomers. The results showed that neither the RB 2 mixture nor the pure ortho- and meta-isomers were P2Y1-like- versus P2X1-selective antagonists. In contrast, the pure para-isomer of RB 2 was a moderate P2Y1-like- versus P2X1-selective antagonist.
Experimental methods and results
· The commercial RB 2 sample was determined to be a mixture of 35% meta- and 65% para-constitutional isomers of the terminal ring F.
· The two constitutional isomers of RB 2 were synthesized and tested alongside the ortho isomer Cibacron Blue 3GA (CB 3GA) on contractions of the rat vas deferens (RVD) stimulated by α,β-methylene ATP (α,β-MeATP) through P2X1-receptors, and relaxations of the carbachol-precontracted guinea pig taenia coli induced by adenosine 5'-O-(2-thiophosphate) (ADPβS) through P2Y1-like-receptors.
· The compounds all showed inhibition of the α,β-MeATP-induced contraction of the RVD and the ADPβS-induced relaxation of the carbachol-precontracted guinea pig taenia coli.
· The IC50 values at P2X1-R were 9.1 μM for CB 3GA, 28.4 μM for RB 2, 19.7 μM for RB 2 meta, and 35.5 μM for RB 2 para. The IC50 values at P2Y1-like-R were 17.4 μM for CB 3GA, 7.7 μM for RB 2, 12.0 μM for RB 2 meta, and 2.6 μM for RB 2 para.

Reactive blue 2 as a receptor antagonist

Structure of reactive blue 2 and related compounds Tuluc, Florin, et al. Naunyn-Schmiedeberg's archives of pharmacology 357.2 (1998): 111-120.

The effects of Reactive Blue 2 and 12 structurally related compounds were investigated on α,β-methylene ATP (α,β-MeATP)-induced contractions of the rat vas deferens, adenosine 5'-O-(2-thiodiphosphate) (ADPβS)-induced relaxations of the guinea pig tapeworm colon pre-contracted with carbocholine, and P2Y receptor-mediated ATP degradation in rat vas deferens. With the exception of Acid Blue 41 and Acid Blue 129 (up to 100 μM), all compounds shifted the concentration-response curve for α,β-MeATP in the rat vas deferens to the right. Most compounds also reduced norepinephrine-induced relaxations of the guinea pig tapeworm colon. Only Reactive Blue 2, cibacron Blue 3GA, Mono Blue A, and Reactive Blue 19 reduced ATP removal from culture medium by vas deferens tissue, with IC values ranging from 17 to 62 μM.
Reactive Blue 2 is one of the most widely used P2 receptor antagonists. Reactive Blue 2 is generally considered to be P2Y selective. However, there is evidence that it also blocks P2 receptors distinct from P2Y. Among its derivatives, Reactive Blues 4 and 5 block unclassified P2 receptors on rat megakaryocytes, while Mono Blue A blocks P2X receptors in rat superior cervical ganglion cells.

ELISA assay capable of detecting the reactive dye Reactive Blue 2

Calibration curve for direct competitive ELISA Stewart, David J., et al. Journal of Chromatography A 623.1 (1992): 1-14.

An indirect competitive ELISA assay capable of detecting the reactive dye Reactive Blue 2 at concentrations as low as 300 pA4, a 3000-fold increase compared to direct spectrophotometric analysis. Analysis of the cross-reactivity of the polyclonal antibody against various compounds structurally related to Reactive Blue 2 showed that the immunoassay appears specific for the anthracene-based dye.
The potential sensitivity of the indirect competitive ELISA was evaluated using lighter-substituted dye-protein conjugates. The sensitivity of the assay increased with decreasing amounts of bound antigen, and under certain conditions, the assay could detect Reactive Blue 2 dye concentrations as low as 300 pM.

What is the molecular formula of Reactive Blue 2?

The molecular formula of Reactive Blue 2 is C29H20ClN7O11S3.

What are some synonyms of Reactive Blue 2?

Some synonyms of Reactive Blue 2 are Affi gel blue, Cibacron Blue 3G, Cibacronblau F3G-A, and CHEBI:34946.

What is the molecular weight of Reactive Blue 2?

The molecular weight of Reactive Blue 2 is 774.2 g/mol.

When was Reactive Blue 2 created?

Reactive Blue 2 was created on June 24, 2005.

What is the description of Reactive Blue 2?

Reactive Blue 2 is an anthraquinone.

What is the IUPAC name of Reactive Blue 2?

The IUPAC name of Reactive Blue 2 is 1-amino-4-[4-[[4-chloro-6-(3-sulfoanilino)-1,3,5-triazin-2-yl]amino]-3-sulfoanilino]-9,10-dioxoanthracene-2-sulfonic acid.

What is the InChI of Reactive Blue 2?

The InChI of Reactive Blue 2 is InChI=1S/C29H20ClN7O11S3/c30-27-35-28(33-13-4-3-5-15(10-13)49(40,41)42)37-29(36-27)34-18-9-8-14(11-20(18)50(43,44)45)32-19-12-21(51(46,47)48)24(31)23-22(19)25(38)16-6-1-2-7-17(16)26(23)39/h1-12,32H,31H2,(H,40,41,42)(H,43,44,45)(H,46,47,48)(H2,33,34,35,36,37).

What is the InChIKey of Reactive Blue 2?

The InChIKey of Reactive Blue 2 is JQYMGXZJTCOARG-UHFFFAOYSA-N.

What is the CAS number of Reactive Blue 2?

The CAS number of Reactive Blue 2 is 12236-82-7.

What is the XLogP3-AA value of Reactive Blue 2?

The XLogP3-AA value of Reactive Blue 2 is 4.4.

Please kindly note that our products are for research use only.

Alfa Chemistry

For product inquiries, please use our online system or send an email to .

Alfa Chemistry
Shopping basket
Loading...
Loading...
Download PDF documentDownload
* I hereby give my consent that I may receive marketing e-mails with information on existing and new services from this company. I know that I can opt-out from receiving such e-mails at any time or by using the link which will be provided in each marketing e-mail.