Determining Calcium Content in Milk Using Complexometric Titration

Principle of Calcium in Milk Determination

The quantitative determination of calcium in milk is based on the very stable 1:1 chelates formed between calcium ions (Ca2+) and the tetrabasic form of ethylenediaminetetraacetic acid (EDTA). Under controlled pH conditions, EDTA quantitatively complexes free Ca2+, enabling precise measurement of its concentration. Alfa Chemistry uses this approach to precisely determine the calcium content in the quality control and nutrition analysis of milk and milk products.

The overall reaction can be represented as

Ca2+ + H2Y2- → CaY2- + 2H+

How Does Back Titration Enhance Accuracy?

Titration of a milk sample with EDTA directly can face a matrix effect or a slow rate reaction. Addition of an excess of standardized EDTA to the sample can increase precision, as it ensures complete chelation of Ca²⁺ with EDTA. The remaining EDTA can then be back-titrated against a standard calcium solution. This indirect method is most preferred with food matrices where kinetics of reaction may be slow.

How to Prepare Standard and Reagent Solutions?

ReagentPreparation MethodKey Parameters
Calcium Standard Solution (0.025 mol·L-1)Weigh accurately an appropriate mass of CaCO3, dissolve in 2.5 mL of 6 mol·L-1 HCl, transfer to a 250 mL volumetric flask, rinse and dilute to the mark with deionized water.Verify molarity gravimetrically; store in a sealed polyethylene bottle.
EDTA Standard SolutionPrepare an approximate 0.025 mol·L-1 solution. Standardize by titrating 25.00 mL of the calcium standard solution at pH ≈ 12 using a calcium-specific indicator. Perform at least three parallel determinations to ensure reproducibility.Store in an acid-washed burette or bottle to avoid metal contamination.
Alkaline MediumAdjust sample pH to ~12 with 1 mol·L-1 KOH.Essential for complete deprotonation of EDTA.

Alfa Chemistry recommends freshly preparing working solutions to maintain chelating activity and minimize contamination.

Catalog NumberProduct NamePrice
ACM471341-3Calcium CarbonateInquiry
ACM7732185WaterInquiry

How to Conduct the Sample Analysis?

A. Sample Preparation

Transfer 5.00 mL of homogenized milk sample to a 125 mL Erlenmeyer flask.

B. Chelation Step

Add 10.00 mL of standardized EDTA solution and 7 mL of 1 mol·L-1 KOH to the flask. Add 20–30 mg of the calcium indicator to the mixture. The solution should turn blue.

C. Back Titration

Titrate the excess EDTA with the standardized calcium solution. At the endpoint, the color will change from blue to violet. Record the volume V1 of the calcium solution consumed. Perform a minimum of three replicate titrations.

D. Blank Determination

Repeat the procedure with 5.00 mL of deionized water instead of milk to obtain blank values V2.

E. Calculation of Calcium Content

Where CCa is the molarity of the standard calcium solution, MCa is the molar mass of Ca2+ (40.08 g·mol-1), and Vmilk is the milk volume analyzed (L).

This formula yields calcium concentration in g·L-1 of milk.

What Precautions Ensure Reliability?

  • pH Control: The EDTA-Ca2+ complex is more stable at alkaline pH. Incomplete pH adjustment could result in incomplete chelation.
  • Indicator Integrity: Make sure to use a fresh indicator solution. An old indicator may give a slow color change.
  • Burette Material: Store EDTA in an acid-washed burette or in plastic bottles. Metal contaminants from burette may introduce error.
  • Replicates: Minimum of triplicate analyses to minimize random error.

Alfa Chemistry emphasizes strict adherence to these parameters to provide reproducible and traceable analytical results for clients in the food and nutraceutical sectors.

Frequently Asked Questions (FAQs)

1. Why use back titration instead of direct EDTA titration for milk?

Because milk contains proteins and other ions that may slow down the direct reaction with EDTA; back titration ensures complete reaction and higher accuracy.

2. Can magnesium ions interfere with the calcium determination?

Yes, Mg2+ can form complexes with EDTA. The alkaline medium and calcium-specific indicator minimize this interference.

3. How long can prepared EDTA solutions be stored?

If stored in acid-washed polyethylene containers away from metal contamination, EDTA solutions remain stable for several weeks.

4. Is sample digestion necessary before titration?

No digestion is required for routine milk analysis using this method, but homogenization is recommended.

5. Can this method be adapted to fortified plant-based beverages?

Yes, but matrix-specific validation and blank corrections are necessary because of differing ionic and protein compositions.

Please continue to explore Alfa Chemistry's high quality chemicals:

Please kindly note that our products are for research use only.

Online Inquiry

Please contact us if you have questions about our company, our products, or general enquiries. Please use the form below.

Orders originating from personal email accounts will not be fulfilled unless the individual is verified to represent a legitimate academic, industrial, or governmental organization.

Alfa Chemistry

For product inquiries, please use our online system or send an email to .

Alfa Chemistry
Shopping basket
Loading...
Loading...
Download PDF documentDownload
* I hereby give my consent that I may receive marketing e-mails with information on existing and new services from this company. I know that I can opt-out from receiving such e-mails at any time or by using the link which will be provided in each marketing e-mail.