logo
Banner

Oil Remover

Among the auxiliary chemicals, oil removers are integral in pre-treatment. Oils and grease, present on textiles due to weaving machinery and handling, hinder subsequent processing stages. Oil removers ensure textiles are free from these contaminants, enhancing uniform dye uptake and finishing quality. Our oil removers include:

CatalogProduct NamepHNote
DYE-AUX-0063High-Efficiency Oil Remover A6.0-7.0
  • Anionic/Nonionic
  • Suitable for oil stain removal or pre-treatment before scouring and dyeing in a single bath for various fabrics.
  • Dosage: Dipping 0.5-2.0 g/L.
DYE-AUX-0064High-Efficiency Oil Remover B3.5-5.5
  • Anionic/nonionic
  • Suitable for the pretreatment or one-bath scouring and dyeing process of polyester warp-knitted, weft-knitted, and their blended fabrics.
  • Exhibits excellent emulsifying and dispersing capabilities, effectively preventing fabric surface color spots and defects caused by oil stains from spinning and knitting processes. Phosphorus-free.
  • Dosage: Dipping 0.3 - 1.5 g/L.
DYE-AUX-0065Same Bath Oil Remover A6.5-8.5
  • Anionic/Nonionic
  • Suitable for the scouring and dyeing bath processes of polyester knits and other fabrics.
  • In near-neutral and slightly acidic baths, it can fully emulsify and disperse oils.
    The scouring and dyeing bath process has little impact on the dye color and can effectively prevent oil stains and color defects.
  • Dosage: Scouring and dyeing bath 0.5-2.0 g/L.
DYE-AUX-0066Same Bath Oil Remover B5.0-7.0
  • Anionic/Nonionic
  • Suitable for the one-bath process for scouring and dyeing of polyester knits and other fabrics.
  • In near-neutral and weak acidic baths, it can fully emulsify and disperse oils.
    Scouring and dyeing in one bath has minimal effect on dye color and can effectively prevent oil spots and color defects.
  • Dosage: Scouring and dyeing in one bath 0.3 - 2.0 g/L.
DYE-AUX-0067Refining Oil Remover A5.0-7.0
  • Nonionic
  • Suitable for use in the one-bath dyeing and scouring processes of polyester knits, low-temperature oil removal procedures, and the scouring and de-oiling processes of cotton and its blends.
  • This concentrated product should be diluted in a 1:3 ratio before use. It has excellent emulsifying and dispersing abilities for synthetic fiber oils in nearly neutral and mildly acidic baths, with minimal impact on color shade.
  • Dosage: One-bath dyeing and scouring 0.2 - 0.5 g/L.
DYE-AUX-0068Refining Oil Remover B4.5-6.5
  • Non-ionic
  • Suitable for degreasing processes of synthetic fabrics such as polyester, for scouring and dyeing in the same bath, and for the refining of cotton and its blended fabrics.
  • It has minimal impact on color light and can prevent oil spots and color defects. Does not damage fibers.
  • Dosage: Scouring and dyeing in the same bath 0.5-1.0 g/L; Refining 0.5-2.0 g/L.
CatalogProduct NamepHNote
DYE-AUX-0069Levelling Oil Remover4.5-6.5
  • Anionic/nonionic
  • Suitable for polyester warp-knitted and weft-knitted fabrics in one-bath scouring and dyeing processes, providing both oil removal and leveling functions.
  • Maintains color stability and high dyeing reproducibility, effectively preventing edge curling in weft-knitted fabrics and shortening processing time.
  • Dosage: Scouring and dyeing in one bath 0.7-1.5 g/L.
DYE-AUX-0070Wool Degreaser7.0-9.0
  • Non-ionic
  • Suitable for degreasing and cleaning of various animal fibers, especially for the scouring and degreasing of raw wool. Effective washing at low temperatures of 60℃-70℃, with better results under mild alkaline conditions.
  • Rapid penetration, strong degreasing and cleaning power, excellent emulsification and dispersion performance.
  • Dosage: 0.8-1.5% (o.w.f)
DYE-AUX-0071Low Temperature Refining Oil Remover A5.0-7.0
  • Anionic/Nonionic.
  • Suitable for low-temperature oil removal, oil removal for yarn-dyed fabrics and garments, and general scouring of various fibers.
  • Exhibits excellent performance in low-temperature oil removal, scouring, penetration, and emulsification. Outstanding resistance to electrolytes and alkali, effectively emulsifying oils under saline-alkali conditions to prevent oil redeposition.
  • Dosage: 1.0-4.0 g/L.
DYE-AUX-0072Low Temperature Refining Oil Remover B6.0-8.0
  • Nonionic.
  • Suitable for low-temperature oil removal for various fibers, oil removal for yarn-dyed fabrics and garments, and general cleaning processes.
  • It exhibits excellent oil removal performance at around 50℃, with rapid penetration, good emulsification and dispersion properties, and strong cleaning power. The cleaning effect is even better under alkaline conditions.
  • Dosage: 1.0-4.0g/L.
DYE-AUX-0073Spot Remover3.0-5.0
  • Anionic/Nonionic.
  • Suitable for oil removal and general washing of various natural or synthetic fiber fabrics. Contains natural solvent-based cleaning agents.
  • Effectively removes yellow stains, oils, and wax from fabrics.
  • Dosage: Soaking oil removal 0.5-3 g/L; Pad-stain wax removal 2-5 g/L; Water washing 1-2 g/L.
DYE-AUX-0074Oil Remover A6.0-8.0
  • Anionic/Nonionic.
  • Applicable for the oil removal and scouring of various natural or synthetic fiber fabrics. Contains a natural solvent-based detergent.
  • Effectively removes oils, waxes, and yellow spots from fabrics. Enhances the washing performance of polyester printed fabrics and reduces the staining of dispersed dyes.
  • Dosage: Impregnation for oil removal 1-5 g/L; Padding for wax removal 2-5 g/L; Washing 1-2 g/L.
CatalogProduct NamepHNote
DYE-AUX-0075Oil Remover B5.0-7.0
  • Anionic.
  • Suitable for oil removal and scouring of various natural or synthetic fiber fabrics. This scouring agent contains natural solvents.
  • It can effectively remove oils, waxes, and yellow stains from fabrics. When used for washing, it can improve the washing effect of polyester printed fabrics and reduce staining from disperse dyes.
  • Dosage: Immersion oil removal 1-5 g/L; Padding wax removal 2-5 g/L; Washing 1-2 g/L.
DYE-AUX-0076Emulsifying Degreaser2.0-4.0
  • Anionic/Nonionic.
  • Suitable for pre-treatment or simultaneous scouring and dyeing processes of polyester woven, warp, and weft knitted fabrics, nylon fabrics, and fabrics containing spandex or blends, especially warp-knitted fabrics.
  • This product combines oil removal and emulsification. It has excellent washing, emulsifying, and dispersing capabilities, effectively removing spinning and weaving oils while preventing oil stains and color spots on the fabric. Phosphorus-free.
  • Dosage: Intermittent 0.3-1.0 g/L; Continuous 1.0-3.0 g/L.
DYE-AUX-0077Non-Ionic Refining Oil Remover6.0-8.0
  • Anionic/Nonionic.
  • Suitable for the pre-treatment or scouring and dyeing in one-bath processes of polyester warp and weft knitted fabrics and their blended textiles.
  • It has excellent emulsifying and dispersing abilities, effectively preventing fabric oil agents from causing stains or color spots on the fabric. Phosphorus-free.
  • Dosage: Immersion 0.3-1.5g/L.
DYE-AUX-0078Acid Cleaner2.0-3.5
  • Anionic/Nonionic.
  • Suitable for the cleaning of heavy oil stains and oily yarns in polyester and its blended fabrics.
  • Effective in removing heavy oil stains and lubricants from fabrics under acidic conditions. Minimal impact on the color shade of dyed fabrics.
  • Dosage: Impregnation 1-5 g/L
DYE-AUX-0079Phosphorus-Free Neutral Degreasing9.0-10.0
  • Powder
  • Suitable for low-alkali oil removal processes and simultaneous scouring and dyeing processes for polyester and its blended fabrics.
  • It has excellent dispersing and emulsifying properties, with strong decontamination capabilities. Also provides desizing, whitening, preventing dye aggregation, and leveling functions. Does not damage fibers and is phosphorus-free.
  • Dosage: 1-4 g/L for simultaneous scouring and dyeing.

Benefits of Using Oil Removers

  • Enhanced Dyeing Uniformity: Oil removers ensure that the fabric surface is uniformly clean, allowing for consistent and even dye penetration and absorption.
  • Improved Fabric Hand and Performance: By effectively removing these contaminants, oil removers contribute to maintaining the innate softness and pliability of the textile, which is crucial for the end-use comfort and performance of the fabric.

Alfa Chemistry's oil removers represent a pivotal innovation in the field of textile pre-treatment auxiliaries. Through their superior ability to disintegrate and emulsify oils and greases, compatibility with diverse fabrics, and integration into various pre-treatment processes, they ensure textiles are impeccably prepared for subsequent finishing processes. Trust Alfa Chemistry for reliable, high-performance solutions that drive excellence in your textile manufacturing.

It is important to note that our products are for research use only and are not for clinical use.

Online Inquiry
Verification code