Titanium(IV) oxide

• Catalog Number: ACM13463677-42
• Product Name: Titanium(IV) oxide
• CAS: 13463-67-7
• Category: Metal & Ceramic Materials
• Description: Nanopowder , 21 nm primary particle size (TEM), ≥99.5% trace metals basis
• Synonyms: Titanium dioxide, Titania
• IUPAC Name: dioxotitanium
• Molecular Weight: 79.87 g/mol
• Molecular Formula: TiO2
• Canonical SMILES: O=[Ti]=O
• InChI: 1S/2O.Ti
• InChI Key: GWEVSGVZZGPLCZ-UHFFFAOYSA-N
• Boiling Point: 3287 °C (lit.)
• Melting Point: 1850 °C>350 °C (lit.)
• Flash Point: Not applicable
• Density: 4.26 g/mL at 25 °C (lit.)
• Solubility: less than 1 mg/mL at 68° F (NTP, 1992);Insoluble in water and organic solvents. Dissolves slowly in hydrofluoric acid and in hot concentrated sulphuric acid.;Insoluble in water;Soluble in hot concentrated sulfuric acid; in hydrofluoric acid; insoluble in hydrochloric acid, nitric acid or diluted sulfuric acid;INSOL IN ORG SOLVENTS;SOLUBLE IN ALKALI;Solubility in water: none;Insoluble
• Appearance: nanopowder
• Application: TiO2 nanoparticles were used to study the photocatalytic hexane vapor degradation. It has been used as a sorbent for arsenic removal. TiO2 nanoparticles are suitable for remediation of antiseptic components in wastewater by photocatalysis. It has also been used to study adsorption of DNA oligonucleotides by titanium dioxide nanoparticles.
• Storage: 2-8°C
• Assay: ≥99.5% trace metals basis
• Color/Form: White, tetragonal crystals;White powder in two crystalline forms, anatase and rutile;AMORPHOUS, INFUSIBLE POWDER;White powder
• Complexity: 18.3
• Covalently-Bonded Unit Count: 1
• EC Number: 236-675-5
• Exact Mass: 79.93777g/mol
• Form: Nanopowder
• Formal Charge: 0
• Hazard Statements: H302-H318-H373
• H-Bond Acceptor: 2
• H-Bond Donor: 0
• Heavy Atom Count: 3
• ICSC Number: 0338
• MDL Number: MFCD00011269
• Monoisotopic Mass: 79.93777g/mol
• NSC Number: 15204
• Odor: Odorless
• Other Experimental: GRAVIMETRIC FACTOR: 0.33279;ANATASE: INDEX OF REFRACTION (NA): 2.554; 2.493; SPECIFIC GRAVITY: 3.84; BROOKITE: INDEX OF REFRACTION (NA): 2.583; 2.586; 2.741; SPECIFIC GRAVITY: 4.17 RUTILE: SPECIFIC GRAVITY: 4.26; INDEX OF REFRACTION (NA): 2.616; 2.903;Reactivity depends on previous heat treatment; prolonged heating produces less soluble material; made soluble by fusion with potassium bisulfate or alkali hydroxides or carbonates to form alkali titanates; Index of refraction: 2.7 (Titania crystals);RUTILE: X-RAY CRYSTALLOGRAPHIC DATA: CRYSTAL SYSTEM: TETRAGONAL; SPACE GROUP: P4/MNM(136); 2 G FORMULA WT/UNIT CELL; X-RAY CRYSTALLOGRAPHIC DATA: AO= 4.5937 + OR - 0.0005; CO= 2.9618 + OR - 0.0010;ANATASE: X-RAY CRYSTALLOGRAPHIC DATA: CRYSTAL SYSTEM: TETRAGONAL; SPACE GROUP: I41/AMD(141); 4 G FORMULA WT/UNIT CELL X-RAY CRYSTALLOGRAPHIC DATA: AO= 3.785 + OR - 0.002; CO= 9.514 + OR - 0.006;BROOKITE: X-RAY CRYSTALLOGRAPHIC DATA: CRYSTAL SYSTEM: ORTHORHOMBIC; SPACE GROUP: PCAB (61); 8 G FORMULA WT/UNIT CELL X-RAY CRYSTALLOGRAPHIC DATA: AO= 5.456 + OR - 0.002; BO= 9.182 + OR - 0.005; CO= 5.143 + OR - 0.003;When substantially pure, a massive single crystal (boule) of rutile has properties of precious gem with a very light straw color and with reflectance, refraction and brilliance measuring greater than those of a diamond. ... high opacity and tinting values are claimed for rutile-like pigments.;Titania is ... large ... crystals (translucent water-white or with yellowish cast) these crystals have refractive index ... higher than diamonds ... but lack hardness of diamonds.;Possesses perhaps the greatest hiding power of all inorg white pigments;Brown tetragonal crystals; MP: 1560 °C; density: 3.9 g/cu cm /Titanium(IV)oxide (Anatase)/;White, orthorhombic crystals; density: 4.17 g/cu cm /Titanium(IV)oxide (Brookite)/;White, tetrahedral crystals; MP: 1843 °C; BBP: approximately 3000 °C; density: 4.17 g/cu cm. Insoluble in water, dilute acid; soluble in concentrated acid /Titanium(IV)oxide (Rutile)/
• Packaging: 100 g
• pH: SUSPENSION IN WATER (1 IN 10) IS NEUTRAL TO LITMUS
• Physical Description: TITANIUM DIOXIDE is an odorless white powder. Tasteless. pH 7.5. Occurs in three crystalline forms. (NTP, 1992);Liquid;DryPowder; Liquid; OtherSolid;DryPowder; DryPowder, Liquid; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals, Liquid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid; WetSolid, Liquid;White to slightly coloured powder;COLOURLESS-TO-WHITE CRYSTALLINE POWDER.;White, odorless powder.;White, odorless powder.
• Precautionary Statements: P280-P305+P351+P338+P310
• Quality Level: 100
• Refractive Index: n20/D 1.520
• Rotatable Bond Count: 0
• Signal Word: Danger
• Specific Surface Area: 35-65 m2/g (BET)
• Topological Polar Surface Area: 34.1A^2
• Vapor Pressure: 0 mm Hg at 68 °F Essentially (NTP, 1992);0 mmHg (approx);0 mmHg (approx)

Custom Q&A

What is the molecular formula of Titanium(IV) oxide?

The molecular formula of Titanium(IV) oxide is TiO2.

What are some synonyms for Titanium(IV) oxide?

Some synonyms for Titanium(IV) oxide are TITANIUM DIOXIDE, Rutile, and dioxotitanium.

What is the molecular weight of Titanium(IV) oxide?

The molecular weight of Titanium(IV) oxide is 79.866 g/mol.

What are the three crystalline forms in which Titanium(IV) oxide occurs?

Titanium(IV) oxide occurs in three crystalline forms.

What is the IUPAC name of Titanium(IV) oxide?

The IUPAC name of Titanium(IV) oxide is dioxotitanium.

What is the CAS number of Titanium(IV) oxide?

The CAS number of Titanium(IV) oxide is 13463-67-7.

What are some other identifiers for Titanium(IV) oxide?

Some other identifiers for Titanium(IV) oxide include 864179-42-0 and 1317-80-2.

What is the EC number of Titanium(IV) oxide?

The EC number of Titanium(IV) oxide is 236-675-5.

What is the InChIKey of Titanium(IV) oxide?

The InChIKey of Titanium(IV) oxide is GWEVSGVZZGPLCZ-UHFFFAOYSA-N.

What is the description of Titanium(IV) oxide?

Titanium(IV) oxide is an odorless white powder with a pH of 7.5. It is tasteless and occurs in three crystalline forms.

Case Study

Preparation of Titanium (IV) Oxide Nanoparticle Dispersed Polyester Resin Composites

Ismail, Amr S., et al. Arabian Journal for Science and Engineering, 2020, 45, 197-203.

TiO2 reinforced linear saturated polyester resin nanocomposites can be prepared by dispersing metal oxide powder into aqueous polyester dispersion. The composition and crystallinity of this polyester nanocomposite are greatly reduced due to ionization. Furthermore, it also exhibits a highly condensed morphology and has high conductivity values due to cross-linking and temperature. The biological activity of the nanocomposites has higher value than the free polyester.
Synthetic procedure of titanium (IV) oxide dispersed polyester resin nanocomposites
· An aqueous dispersion of polyester was prepared by adding 9.95 g of polyester to 50 ml of H2O under vigorous stirring for 3 h at room temperature.
· Metal oxides were added slowly as a powder and were vigorously stirred with 0.05 g of titanium (IV) oxide for 3 h such that a weight percent of 0.05 for metal oxide/polyester was established.
· The suspension was stirred for 3 h followed by aging for 48 h at 100 °C in an autoclave. Then after washing and drying, the final nanocomposite product was obtained.

Preparation of Titanium Dioxide-Based Photocatalytic Materials

Tsang, Chi Him A., et al. Environment International, 2019, 125, 200-228.

Titanium dioxide (TiO2) family materials have been widely studied as photocatalysts from pure TiO2 to chemically modified TiO2-based materials due to their strong activity in photocatalytic reactions. As a semiconductor photocatalyst, titanium dioxide has excellent properties such as non-toxicity, chemical stability, high photocatalytic activity, ability to form thin films on substrates, and environmental friendliness.
Synthesis of Chemically Modified Titanium Dioxide Photocatalyst
· Metal-doped TiO2: From ordinary metals to transition metal particles or ions, all can be used as dopants for TiO2. For example, Fe-doped TiO2 can be used to catalyze the photodecomposition of CH3Cl.
· Metal oxide doped TiO2: Common metal oxide dopants include WO3, MnO2, FeOx, YOx, VOx, NiO and ZnO, etc.
· Doping TiO2 with non-metal elements: Doping TiO2 with non-metal elements is also an effective candidate method, such as anions (N3-, C4-, S4-), halides (F-, I-) and amines.
· TiO2 supported on substrates: Nanomaterials can be used as carriers to support TiO2 to improve its photocatalytic performance. Examples include carbon nanotubes (CNTs), graphitic carbonitrile (gC3N4), carbon fibers, and graphene.