Dimethyl Phthalate

  • CAS
  • Size
  • Purity
  • Price
  • Availability
  • Quantity
  • Order

If you have any other questions or need other size, please get a quote.

Catalog Number
ACM131113-3
Product Name
Dimethyl Phthalate
Structure
Structure
CAS
131-11-3
Category
Heterocyclic Organic Compound
Description
Dimethyl phthalate is a organic compound with molecular formula (C2H3O2)2C6H4. The methyl ester of phthalic acid, it is a Colorless liquid that is soluble in organic solvents.Dimethyl phthalate is used as an insect repellent for mosquitoes and flies. It is also an ectoparasiticide and has many other uses, including in solid rocket propellants, and plastics. Its LD50 is 8 200 mg/kg (rats, oral).
Synonyms
DMP
IUPAC Name
dimethyl benzene-1,2-dicarboxylate
Molecular Weight
194.2
Molecular Formula
C10H10O4
Canonical SMILES
COC(=O)C1=CC=CC=C1C(=O)OC
InChI
InChI=1S/C10H10O4/c1-13-9(11)7-5-3-4-6-8(7)10(12)14-2/h3-6H,1-2H3
InChI Key
NIQCNGHVCWTJSM-UHFFFAOYSA-N
Boiling Point
282 °C (lit.)
Melting Point
2ºC
Flash Point
150ºC
Density
1.192
Solubility
less than 1 mg/mL at 68° F (NTP, 1992);0.02 M;In water, 4,000 mg/L at 25 °C;Miscible with alcohol, ether, chloroform. Practically insoluble in petroleum ether, and other paraffin hydrocarbons.;Solubility in mineral oil at 20 °C: 0.34 g/100 g;Miscible with ethanol, ethyl ether; soluble in benzene; slightly soluble in carbon tetrachloride;Readily soluble in organic solvents, alcohols, esters, ketones, chlorinated hydrocarbons. Slightly soluble in some types of mineral oil.;Solubility in water, g/100ml at 20 °C: 0.43;0.4%
Appearance
Oil
Application
DMP can be used to plasticize cellulose acetate which can be further used in the production of laminated safety glass for flight helmets and goggles. It can be used as a plasticizer that forms complexes with polyvinyl alcohol (PVA) and lithium salts for the development of solid polymer electrolyte (SPE) for solar cell (SC) s. It may also be used as a mixture of polymeric solvents which can be used in the preparation of polyvinylidene fluoride (PVDF).
Assay
≥99%
Autoignition Temperature
1033 °F
Color/Form
Pale yellow;Colorless, oily liquid [Note: A solid below 42 degrees F]
Complexity
200
Covalently-Bonded Unit Count
1
Decomposition
Hazardous decomposition products: toxic gases and vapors (such as carbon monoxide) may be released in a fire involving dimethylphthalate.;When heated to decomp it emits acrid smoke and irritating fumes.
EC Number
205-011-6
Exact Mass
194.057909g/mol
Features And Benefits
1. High quality products
2. Fast delivery
3. Additional products can be ordered, please contact us for details
Form
viscous liquid
Formal Charge
0
Hazard Codes
F; T
H-Bond Acceptor
4
H-Bond Donor
0
Heat of Vaporization
93.1 g-cal/g
Heavy Atom Count
14
ICSC Number
0261
LogP
1.25980
MDL Number
MFCD00008425
Monoisotopic Mass
194.057909g/mol
NACRES
NA.23
NSC Number
15398
Odor
Slight aromatic odor
Other Experimental
VOLATILITY: 4.0 MG/SQ CM/HR AT 100 °C;WEIGHT/VOLUME CONVERSION: 7.93 MG/CU M= APPROX 1 PPM;The release time of the repellent chemical ... dimethyl phthalate ... from porous propylene slabs was much higher (approx 7 times more) than from porous propylene powders. The release time was a function of the initial concn and was inversely proportional to vapor pressure in case of porous powder. /Former US/;BP: 232.7 °C at 200 mm Hg; 210.0 °C at 100 mm Hg; 194.0 °C at 60 mm Hg; 182.8 °C at 40 mm Hg; 164.0 °C at 20 mm Hg; 147.6 °C at 10 mm Hg; 131.8 °C at 5 mm Hg; 100.3 °C at 1.0 mm Hg;The commercial product freezes at approximately 0 °C.;VP: <0.01 mm Hg at 20 °C;Bulk density 9.93 lb/gal at 68 °F.;Readily hydrolyzed by alkalis, with cleavage of both ester groups.;Phthalate esters would be expected to have UV maxima in the 230 nm and 270 nm regions. /Phthalate esters/;... Resistance to migration from polymers, low temperature flexibility ... compatibility with polar polymers and additives over a wide range of compositions. /Phthalate esters/;Henry's Law constant = 1.97X10-7 cu cm/molec-sec at 25 °C (est);Hydroxyl radical reaction rate constant = 5.74X10-13 cu cm/molec-sec at 25 °C (est)
Packaging
Packaging
1, 4 L in poly bottle
Physical State
Liquid
PSA
52.6
PubChem ID
24874467
Quality Level
100
Refractive Index
1.514-1.516
RIDADR
UN 3082
Rotatable Bond Count
4
RTECS Number
TI1575000
Stability
Stable. Combustible. Incompatible with strong oxidizing agents, strong acids, strong bases, nitrates. Sensitive to prolonged exposure to light.
Storage Conditions
2-8ºC
UNII
08X7F5UDJM
UN Number
3082;3082
Vapor Density
6.69 (NTP, 1992) (Relative to Air);6.69 (Air = 1);Relative vapor density (air = 1): 6.69;6.69
Vapor Pressure
1 mm Hg at 212.5 °F ; 5 mm Hg at 269.2° F; 10 mm Hg at 297.7° F (NTP, 1992);0.00 mmHg;3.08X10-3 mm Hg at 25 °C /from experimentally-derived coefficients/;Vapor pressure, Pa at 20 °C: 0.8;0.01 mmHg;0.01 mmHg
Viscosity
17.2 cP at 25 °C
WGK Germany
1
XLogP3
1.6
Please kindly note that our products are for research use only.

Discover More

Contact Us

For product inquiries, please use our online system or send an email to .

Download
Verification code
* I hereby give my consent that I may receive marketing e-mails with information on existing and new services from this company. I know that I can opt-out from receiving such e-mails at any time or by using the link which will be provided in each marketing e-mail.
qrcode